The front of a skincare box is advertising: “glow”, “fairness in 7 days”, “doctor formula”. The back of the box is where the truth lives, if you know how to read it. This guide shows you how to read a skincare label in a few minutes, so you can spot weak formulas and unsafe creams before they touch your face.

Quick answer

To read a skincare label, check the ingredient list (it runs from highest amount to lowest), look for the active ingredient and whether its strength is printed, note fragrance, then find the expiry date or open-jar symbol, batch number and manufacturer details. Avoid any product with no ingredient list, “whitening” promises or mercury on the label.

Key takeaways

  • Ingredients are listed from most to least. Anything under 1% can appear in any order at the end.
  • A printed percentage (like “Procapil 3%”) lets you compare. No percentage means you can’t judge the strength.
  • “Fragrance” or “parfum” can hide many ingredients. “Unscented” does not always mean fragrance-free.
  • Check expiry, the open-jar symbol, batch number and the maker’s name and address.
  • Unlabelled “formula creams” may contain mercury or steroids. Don’t use them.

Front of pack vs back of pack

The front is designed to sell. Words like “natural”, “herbal”, “derma” and “advanced” have no fixed meaning. The back tells you what’s inside, how to use it and who made it.

A good label in Pakistan, in Urdu or English, should give you at least:

  • A full ingredient list
  • Directions and warnings
  • Manufacturing and expiry dates, or a period-after-opening symbol
  • A batch (lot) number
  • The manufacturer’s name and address

Step 1: Read the ingredient list (INCI)

Most brands use INCI names, a standard international naming system. That’s why you’ll see “Aqua” for water or “Glycerin” instead of a brand name.

The order tells you the amount

Both US (FDA) and European rules say ingredients must be listed in descending order. The first ingredient is present in the largest amount, the next is less, and so on.

There’s one catch. Ingredients below 1% can be listed in any order after the rest. So in the second half of a list, position tells you much less.

A simple way to use this

  • The first five or so ingredients usually make up most of the product. In creams that’s often water, oils and thickeners.
  • If a “hero” ingredient advertised in big letters on the front appears near the very end, after preservatives and fragrance, it is probably present in a small amount.
  • Small amounts aren’t always bad. Some actives work at low levels. But a label can’t tell you that unless it prints the strength.

Step 2: Find the actives, and check if the strength is printed

Actives are the ingredients that do the main job. Common ones you’ll see in Pakistan include:

  • For dark spots and dull skin: kojic acid, alpha arbutin, vitamin C (sometimes as magnesium ascorbyl phosphate, or MAP), niacinamide, glutathione. For more, see dark spots on face: causes and how to fade them.
  • For oily skin and pimples: salicylic acid, sulphur, benzoyl peroxide.
  • For hair fall: Procapil, minoxidil (a medicine), biotin, caffeine. See Procapil vs minoxidil for how they differ.
  • Sunscreen filters: zinc oxide, titanium dioxide, Benzophenone-3 and others, plus the SPF number.

Printed strength vs no strength

This is where “hidden weak formulas” live. A label that says “with Vitamin C” could contain a lot or a trace. Without a number, you can’t compare one product with another.

When a percentage or a “per tablet” amount is printed, you can:

  • Compare two products fairly
  • Check whether the amount is in a range that has been studied
  • Avoid taking or applying too much

For supplements, look for amounts per tablet (mg, mcg or IU) and multiply by the number of tablets per day. Our guide to biotin for hair fall and how much to take shows why this matters.

ZarDerm as an example (the honest version)

We use our own packs to show both sides:

Product Strengths printed? What the pack shows
Zarvion Hair Growth Serum Yes Every ingredient with its %: Aloe Vera 5%, Procapil 3%, Vitamin B6 2.5%, Zinc Gluconate 1.5%, L-Arginine 1.5%, Panthenol 1%, Saw Palmetto 1%, Biotin 0.3%, Cationic Guar 0.1%
Zarvion Biotin, Zarvit, Glowzar L-Glutathione tablets Yes Amount per tablet, e.g. Biotin 5000 mcg, Iron 18 mg, L-Glutathione 500 mg
Glowzar Face Wash, Cream SPF 60 and Soap Bar No Key actives named (e.g. L-Glutathione, Kojic Acid, Arbutin, Vitamin C), but not their strengths
Fungizar Medicated Bar No Sulphur, Salicylic Acid and EDTA named, strengths not printed
Zarvion Anti Hair Fall Shampoo No Biotin, Keratin, Zinc Pyrithione, Vitamin B6, Salicylic Acid named, strengths not printed

We’d rather tell you this than pretend. Where a strength isn’t printed, judge the product by its full ingredient list, the directions and how your skin responds, not by a number we can’t show.

From ZarDerm

Zarvion Hair Growth Serum with Procapil 3%

A leave-on overnight scalp spray with every ingredient’s strength printed on the pack, from Procapil 3% to Biotin 0.3%. Sulphate-free and paraben-free.

See Zarvion Hair Growth Serum

Step 3: Check fragrance and allergens

The FDA allows many scent chemicals to be grouped under one word: “fragrance” (or “parfum” on European-style labels). You won’t see the individual ingredients.

DermNet notes that fragrance allergy affects around 1% of adults and is one of the most common causes of allergic skin reactions. It also warns that:

  • “Unscented” products may still contain a masking fragrance.
  • “Herbal”, “botanical” or “natural” ingredients can contain fragrance chemicals too.
  • Labels don’t always list every fragrance chemical, especially those below a set threshold.

If you have sensitive skin or eczema, choose fragrance-free products and always patch test: apply a little on your inner arm or behind the ear for a day or two before using it on your face.

Step 4: Expiry, the open-jar symbol and batch number

Expiry and PAO

Under EU cosmetics rules, a product that lasts less than 30 months must show a “best before” date. One that lasts longer shows a small open-jar symbol with a number like “12M”. That means it’s safe for 12 months after opening. Many Pakistani and imported packs use one or both.

  • Write the opening date on the box with a marker.
  • Throw away products that change smell, colour or texture, even before the date.

Batch number

The batch or lot number (often “B. No.” or “Lot”) lets the maker trace a product if something goes wrong. A pack with no batch number, no manufacturing date and no address is a red flag.

Step 5: DRAP and who made it

In Pakistan, the Drug Regulatory Authority of Pakistan (DRAP) regulates medicines and health products. The rules differ by product type, so keep these points general:

  • Medicines (for example creams with prescription steroids) are registered with DRAP. DRAP has a public online registry where you can search registered drugs by registration number, brand or generic name.
  • Nutraceuticals and health products such as vitamins and supplements are enlisted with DRAP under the Alternative Medicines and Health Products (Enlistment) Rules, 2014.
  • For any product, check that the manufacturer’s name and full address are printed. If you can’t tell who made it, don’t put it on your skin.

ZarDerm products are made in Karachi by DRAP-enlisted manufacturers: SAIA Healthcare for skin and hair care, and Burj Health Care for supplements. Our supplements are nutraceuticals, not medicines, and are “not for treatment of any disease”.

Red flags on a skincare label

Red flag Why it matters
“Whitening in 7 days” or “permanent fairness” No product can honestly promise this. Creams sold on fairness promises have been found to contain mercury or steroids.
No ingredient list, or a loose “formula cream” in a plain jar The FDA advises against using unlabelled products. You can’t know what’s inside.
“Mercurous chloride”, “calomel”, “mercuric”, “mercurio” or “mercury” The FDA says to stop using any product listing these. Mercury can affect the nervous system, and it can pass to babies through breast milk.
Steroids such as clobetasol or betamethasone in a face cream you bought without a prescription Pakistani studies link facial steroid use to acne, redness and rosacea-like rashes.
No manufacturer, address or batch number No one is accountable if something goes wrong.

Mercury in skin-lightening creams

The World Health Organization says mercury-containing skin-lightening products are hazardous to health and have been banned in many countries, yet they are still sold, including online. WHO also flags hydroquinone as another hazardous ingredient in some of these products. A 2023 amendment to the Minamata Convention prohibits the manufacture, import and export of certain mercury-added products, including cosmetics, after 2025.

Steroids hidden in “fairness” creams

This is a real problem here. A Lahore study of 200 patients with steroid-related facial rashes found half had used potent steroids mixed with fairness creams, and none knew the ingredients they were using. A 2024 Karachi study of 226 patients found steroid-induced acne in 83.6%, along with redness and visible blood vessels.

When to see a doctor

Stop the product and see a doctor if:

  • Your skin burns, swells, blisters or itches badly after using something new.
  • You’ve used a “formula” or fairness cream for weeks and now have redness, pimples or thin skin, especially if it flares when you stop.
  • You suspect a product had mercury and you have tingling, tremors, mood changes or memory problems.
  • You’re pregnant or breastfeeding and unsure about any product.

Bring the pack with you. The label helps your doctor work out what happened.

Frequently asked questions

Why is water always the first ingredient?

Because most creams, lotions and face washes are mostly water. Ingredients are listed from largest to smallest amount, so water often comes first.

If a strength isn’t printed, is the product weak?

Not necessarily. It just means you can’t judge it from the label. Look at the full list, the directions, and your skin’s response over several weeks.

What does “12M” with a little jar mean?

It’s the period after opening. The product is meant to be used within 12 months once opened.

Are “herbal” or “natural” products always safer?

No. DermNet notes that botanical ingredients can contain fragrance chemicals, and some “herbal” formula creams have been found to hide steroids. Read the full list and patch test anyway.

How do I check a supplement label?

Read the amount of each vitamin and mineral per tablet, multiply by the daily dose, and add up iron and zinc if you take more than one product. Our guide to multivitamins for hair, skin and nails walks through it.

Not sure which ingredients suit your skin? Take our skin quiz, or browse products for dark spots and uneven tone. You can also compare full ingredient lists on the Glowzar Cream SPF 60 and Zarvit Multivitamin pages.

This article is general information, not medical advice. Always patch test new skincare and speak to a doctor about reactions or before using medicated creams.

Sources

  1. Cosmetics Labeling Guide — U.S. Food and Drug Administration
  2. Regulation (EC) No 1223/2009 on cosmetic products, Article 19 — European Union (2009)
  3. Fragrance allergy — DermNet
  4. Mercury Poisoning Linked to Skin Products — U.S. Food and Drug Administration
  5. Mercury in skin lightening products — World Health Organization (2019)
  6. Mercury and health — World Health Organization
  7. Facial abuse of topical steroids and fairness creams: a clinical study of 200 patients — Journal of Pakistan Association of Dermatologists (2014)
  8. Obsession to fairness and topical steroid induced acne: a situation analysis in Karachi — Pakistan Journal of Medical Sciences (2024)
  9. Registered Product Data: Public Registry Search — Drug Regulatory Authority of Pakistan
  10. Applications of Enlistment for Nutraceuticals, Herbals and Alternative Health Products — Drug Regulatory Authority of Pakistan